GLASS BENDING

The tissue is used as a protective membrane between the mould and the glass sheet, allowing optimum heat transfer and minimising risk of breakage in the glass bending process.

Product Details - Metric

Typical Product Codes P500SA P900SA
Nominal Thickness 0.50mm 0.90mm
Binder Styrene Acrylic Styrene Acrylic

more details

Product Details - IMPERIAL

Typical Product Codes P500SA P900SA
Nominal Thickness 0.020 in. 0.035 in.
Binder Styrene Acrylic Styrene Acrylic

more details

 

Product Details - Metric

  P500SA P900SA Made to order Maximum
Glass Type C-glass C-glass -
Fibre Diameter 12-13µ 12-13µ -
Weight 40 g/m2 75 g/m2 -
Nominal Thickness 0.5 mm 0.9 mm -
Binder Type Styrene Acrylic Copolymer Styrene Acrylic Copolymer -
Binder Content 6-8% 8-10% -
Styrene Monomer Solubility Insoluble Insoluble -
Standard Width 1000 mm 1000 mm 2.0 m
Standard Roll Length 200 m 100 m 350 m

fewer details

Product Details - IMPERIAL

  P500SA P900SA Made to order Maximum
Glass Type C-glass C-glass -
Fibre Diameter 0.0005 in. 0.0005 in. -
Weight 0.131 oz/ft.2 0.245 oz/ft.2 -
Nominal Thickness 0.020 in. 0.035 in. -
Binder Type Styrene Acrylic Copolymer Styrene Acrylic Copolymer -
Binder Content 6-8% 8-10% -
Styrene Monomer Solubility Insoluble Insoluble -
Standard Width 39 in. 39 in. 78 in.
Standard Roll Length 650 ft. 325 ft. 1150 ft.

fewer details

 

Designed by Cressaid