MOULDING TISSUE FOR GRP
Regina Glass Fibre Moulding Tissue has been designed to give a reinforced resin rich surface to moulded GRP parts produced by hand lay-up or by hot/cold press techniques. The tissues are soft, allowing moulding around contours such as in surf boards, small boats, furniture and automotive cowlings. The tissue ensures a high quality, corrosion resistant surface giving a long life product.
Moulding tissues are available with acrylic (Regina RA) binders, acrylic designed for general moulding.
Regina surfacing Tissue meets the requirements of:
British Standard BS4994
"Design and Construction of Vessels and Tanks in Reinforced Plastics".
US Standard ASME/ANSI RPT-1-1989
"Reinforced Thermoset Plastic Corrosion Resistant Equipment".
Product Details - IMPERIAL
| Typical Product Codes |
P250RA to P500RA |
P350PE to P400PE |
| Nominal Thickness |
0.010 in. to 0.020 in. |
0.014 in. to 0.016 in. |
| Binder |
Acrylic |
Polyester |
more details
Product Details - IMPERIAL
| |
P250RA |
PS350PE |
Made to order Minimum |
Made to order Maximum |
| Glass Type |
C-glass |
C-glass |
- |
- |
| Fibre Diameter |
0.0005 in. |
0.0005 in. |
- |
- |
| Weight |
0.072 oz/ft2 |
0.105 oz/ft2 |
- |
- |
| Nominal Thickness |
0.010 in. |
0.014 in. |
0.008 in. |
0.043 in. |
| Binder Type |
Acrylic |
Polyester |
- |
- |
| Binder Content |
6-8% |
6-8% |
- |
- |
| Styrene Monomer Solubility |
Insoluble |
Insoluble |
- |
- |
| Theoretical Resin Absorption |
0.705 oz/ft2 |
1.000 oz/ft2 |
- |
- |
| Standard Width |
39 in. |
39 in. |
- |
78 in. |
| Standard Roll Length |
650 ft. |
650 ft. |
160 ft. |
1150 ft. |
fewer details
