A range of standard products is available, but we are also able to supply products designed to meet specific customer requirements.

The following gives an indication of the range of product characteristics we can supply:

Weight	From 20g/m2 to 90g/m2
Thickness	From 0.20mm up to 1.10mm (20 to 110 microns)
Binder	Styrene, acrylic, styrene-acrylic, polyester, urea/formaldehyde and PVA are all available

Standard Sizes and Packs

Roll Width	From 50mm up to 2m
Roll Length	50m up to 400m

Standard Complied With

British Standard BS 4994	"Design and Construction of Vessels and Tanks in Reinforced Plastics"
US Standard ASME/ANSI RPT-1-1989	"Reinforced Thermoset Plastic Corrosion Resistant Equipment"

We are also able to supply painted tissues.

All Regina products are manufactured to the highest quality standards using C-glass, a chemically resistant glass that meets the chemical stability classes -

Acid Class 1	(DIN 12 116)
Alkali Class 2	(DIN 52 322)
Hydrolytic Class 3	(DIN 12 111)

Easy to work with, less binder chemicals

Products are manufactured using the dry glass tissue making process giving a tissue made up of continuous glass filaments. The resulting product is workable at lighter weight and with less binder chemicals than products made using other processes.

Product	Typical Product Codes Supplied	Nominal Thickness	Binder	Comments
Surfacing Tissue	P200SA to P800SA P250LN to P800LN	0.20 to 0.80 mm 0.25 to 0.80 mm	Styrene Acrylic Styrene	Standard Wet Out Fast Wet Out
Moulding Tissue	P250RA to P500RA	0.25 to 0.50 mm 0.35 to 0.40 mm	Acrylic Polyester	- -
Filament Winding	P200FW to P300FW	0.20 to 0.30 mm	Modified Acrylic	-
Corrosion Resistance	-	-	-	-
Pipewrap Tissues	P250 to P500HP	0.25 to 0.50 mm	Urea Formaldehyde	-
Glass Bending	P500SA	0.50 mm	Acrylic	-
Battery Separator Felts	P0.25ASE to P1.5ASE	0.25 to 1.50 mm -	Modified Acrylic Polystyrene	Plain Tissue
Insulation Facing	P500PVB	0.50 mm	UF/PVA	Black Painted
Glass Wool	-	-	-	-
Nanoveil	-	-	-	-
FireShield	-	-	-	-
Paint Reinforcement	P250RA, P200ASE	0.25, 0.20 mm	Acrylic Polyester	-
Filtration	P400UF	0.40 mm	Urea Formaldehyde	-
Irrigation	P400UF to P450UF	0.40 to 0.45 mm	Urea Formaldehyde	Plain Tissue

Product	Typical Product Codes Supplied	Nominal Thickness	Binder	Comments
Surfacing Tissue	P200SA to P800SA P250LN to P800LN	0.008 to 0.032 in. 0.010 to 0.032 in.	Styrene-Acrylic Styrene	Standard Wet Out Fast Wet Out
Moulding Tissue	P250RA to P500RA	0.010 to 0.020 in. 0.014 to 0.016 in.	Acrylic Polyester	- -
Filament Winding	P200FW to P300FW	0.008 to 0.012 in.	Modified Acrylic	-
Corrosion Resistance	-	-	-	-
Pipewrap Tissues	P250 to P500HP	0.010 to 0.020 in.	Urea Formaldehyde	-
Glass Bending	P500SA	0.020 in.	Acrylic	-
Battery Separator Felts	P0.25ASE to P1.5ASE	0.010 to 0.059 in. -	Modified Acrylic Polystyrene	Plain Tissue
Insulation Facing	P500PVB	0.020 in.	UF/PVA	Black Painted
Glass Wool	-	-	-	-
Nanoveil	-	-	-	-
FireShield	-	-	-	-
Paint Reinforcement	P250RA, P200ASE	0.010, 0.008 in.	Acrylic Polyester	-
Filtration	P400UF	0.016 in.	Urea Formaldehyde	-
Irrigation	P400UF to P450UF	0.016 to 00.018 in.	Urea Formaldehyde	Plain Tissue

A range of standard products is available, but we are also able to supply products designed to meet specific customer requirements.

The following gives an indication of the range of product characteristics we can supply:

Weight	From 0.066oz/ft2 to 0.294oz/ft2
Thickness	From 0.008in. up to 0.043in.
Binder	Styrene, acrylic, styrene-acrylic, polyester, urea/formaldehyde and PVA are all available

Standard Sizes and Packs

Roll Width	From 1.969in. up to 78.740in.
Roll Length	164.041ft up to 1,312.336ft

Standard Complied With

British Standard BS 4994	"Design and Construction of Vessels and Tanks in Reinforced Plastics"
US Standard ASME/ANSI RPT-1-1989	"Reinforced Thermoset Plastic Corrosion Resistant Equipment"

We are also able to supply painted tissues.

All Regina products are manufactured to the highest quality standards using C-glass, a chemically resistant glass that meets the chemical stability classes -

Acid Class 1	(DIN 12 116)
Alkali Class 2	(DIN 52 322)
Hydrolytic Class 3	(DIN 12 111)

Easy to work with, less binder chemicals

Products are manufactured using the dry glass tissue making process giving a tissue made up of continuous glass filaments. The resulting product is workable at lighter weight and with less binder chemicals than products made using other processes.