REGINA - Product Specifications

A range of standard products is available, but we are also able to supply products designed to meet specific customer requirements.

The following gives an indication of the range of product characteristics we can supply:

Weight	From 20g/m² to over 100g/m²
Thickness	From 0.20mm up to 1.10mm (20 to 110 microns)
Binder	Styrene, acrylic, styrene-acrylic, polyester, urea/formaldehyde and PVA are all available

Standard Sizes and Packs

Roll Width	From 50mm up to 2m
Roll Length	50m up to 400m

Standard Complied With

British Standard BS 4994	"Design and Construction of Vessels and Tanks in Reinforced Plastics"
US Standard ASME/ANSI RPT-1-1989	"Reinforced Thermoset Plastic Corrosion Resistant Equipment"

We are also able to supply painted tissues, tissues with fibre glass slivers attached or printed glass tissue.

All Regina products are manufactured to the highest quality standards using C-glass, a chemically resistant glass that meets the chemical stability classes -

Acid Class 1	(DIN 12 116)
Alkali Class 2	(DIN 52 322)
Hydrolytic Class 3	(DIN 12 111)

Easy to work with, less binder chemicals

Products are manufactured using the dry glass tissue making process giving a tissue made up of continuous glass filaments. The resulting product is workable at lighter weight and with less binder chemicals than products made using other processes.

Product	Typical Product Codes Supplied	Nominal Thickness	Binder	Comments
Surfacing Tissue	P200SA to P800SA P250LN to P800LN	0.20 mm to 0.80 mm 0.25 mm to 0.80 mm	Styrene-Acrylic Styrene	Standard Wet Out Fast Wet Out
Moulding Tissue	P250RA to P500RA P350PE to P400PE	0.25 mm to 0.50 mm 0.35 mm to 0.40 mm	Acrylic Polyester	- -
Printed Surfacing Tissue	IF300M	0.30 mm	Modified Acrylic	Wood Grain Print
Filament Winding	P200FW to P300FW	0.20 mm to 0.30 mm	Modified Acrylic	-
Corrosion Resistance	-	-	-	-
Pipewrap Tissues	P250 to P500HP	0.25 mm to 0.50 mm	Urea Formaldehyde	-
Glass Bending	P500SA	0.50 mm	Styrene Acrylic	-
Battery Separator Felts	P0.25ASE to P1.5ASE VB500DIN, VB600DIN	0.25 mm to 1.50 mm -	Modified Acrylic Polystyrene	Plain Tissue Sliver Tissue
Insulation Facing	P500PVB	0.50 mm	UF/PVA	Black Painted
Glass Wool	-	-	-	-
Paint Reinforcement	P250RA, P200ASE	0.25 mm, 0.20 mm	Acrylic	-
Filtration	P400UF	0.40 mm	Urea Formaldehyde	-
Irrigation	P400UF to P450UF R400UF to R450UF	0.40 mm to 0.45 mm 0.40 mm to 0.45 mm	Urea Formaldehyde Urea Formaldehyde	Plain Tissue Reinforced Tissue